The furnace material is 430 magnetic stainless steel, which is resistant to high temperature, deformation and environmental protection. The bracket is iron paint.

The height of the carbon layer can be adjusted by 8 or 10 cm, and the 2 sides are equipped with wind shields to control ventilation, and the finished products can be shipped without installation, and can be equipped with 201 model stainless steel fine mesh and steel chrome-plated straight strip mesh, which is cost-effective online. Patents have been applied, anti-counterfeiting must be investigated.0.8 thick set of furnace 6---9 kg weight.

Standard with two baffles

The surface of the fine mesh solder joint is not treated, and stainless steel material is used. Multiple rounded corners such as the baking tray and stove are treated by hand to prevent damage

The barbecue stand is stuck in the oven and will not shake

The bracket is foldable with the support rod removed

Straight mesh with card strips, more suitable

Multiple materials, stainless steel reflective material, difficult to handle when taking photos. Please provide a few detailed pictures

Small side panels are also wrapped.

The following picture shows a 0.8 thick stainless steel oven, indicating that the carbon plate is pressed over the ribs
The 80 cm stainless steel oven has a single furnace in 75 yuan, and the carbon plate of the new furnace is reinforced, and it is burnt to prevent deformation.

The stove is designed with anti cutting hands. Our board has a thickness of 0.8 and an internal width of 18,

1.2 Thickened version refers to the upgrade from 0.8 to 1.2 thick, with the same size, and the price changed from 75 yuan to 130 yuan. Other accessories can refer to the set. The furnace body can't be wrapped, and the material is too thick, which is a right angle, bending and wrapping. If the material is thick enough, it won't hurt your hands. There are also small baffles on both sides with the default of 0.8, and there is no time for small components. In fact, the finished product of 0.8 is also very strong.

Below is an explanation of the set with a thickness of 0.8. Thickening only affects the price of the stove, while other accessories remain the same

The following is the bracket installation instructions.

The following are installation instructions with a storage board. The poles sent can be left unused to prevent the use of the storage board and to keep them as a backup

We also guarantee the firmness and do not produce defective products

Upload some real pictures of buyers below,